High density
Fiber pitch: 0.25mm
Mold marks to indicate fiber type and ferrule grade
Pre-angled SM
MM MT low Loss optimized for 10G, 40G, 100G and 400G applications
SM MT low loss meets IEC 61755-3-31 Grade B requirements
With exceptional environmental stability after annealing
Ferrule Hole | Type & Grade | Fiber Hole Diameter(mm) | Guide Pin Hole Diameter(mm) | Insertion Loss(dB) |
MT-12 | MM Standard | 0.125+0.002/-0 | 0.7±0.001 | Typical=0.25 Max≤0.5 |
MM Low Loss | 0.125+0.002/-0 | 0.7+0/-0.001 | Typical=0.12 Max≤0.35 | |
SM Standard | 0.125+0.0013/-0 | 0.7+0/-0.001 | Typical=0.25 Max≤0.7 | |
SM Low Loss | 0.125+0.0009/-0 | 0.6990+0.0006/-0 | Typical=0.12 Max≤0.35 | |
MT-24 | MM Standard | 0.125+0.002/-0 | 0.7±0.001 | Typical=0.25 Max≤0.5 |
MM Low Loss | 0.125+0.002/-0 | 0.7+0/-0.001 | Typical=0.12 Max≤0.35 | |
SM Standard | 0.125+0.0013/-0 | 0.7+0/-0.001 | Typical=0.25 Max≤0.7 | |
SM Low Loss | 0.125+0.0009/-0 | 0.6990+0.0006/-0 | Typical=0.12 Max≤0.35 | |
MT-16 | MM Standard | 0.125+0.002/-0 | 0.55±0.001 | Typical=0.25 Max≤0.5 |
MM Low Loss | 0.125+0.002/-0 | 0.55+0/-0.001 | Typical=0.12 Max≤0.35 | |
SM Standard | 0.125+0.0013/-0 | 0.55+0/-0.001 | Typical=0.25 Max≤0.7 | |
SM Low Loss | 0.125+0.0009/-0 | 0.5490+0.0006/-0 | Typical=0.12 Max≤0.35 | |
MT-36 | MM Standard | 0.125+0.002/-0 | 0.7±0.001 | Typical=0.25 Max≤0.5 |
MT-12-Mini | MM Standard | 0.125+0.002/-0 | 0.7±0.001 | Typical=0.25 Max≤0.5 |
MM Low Loss | 0.125+0.002/-0 | 0.7+0/-0.001 | Typical=0.12 Max≤0.35 |
